Cisco Headend System Release 2.7 Installation Guide
Load a New Image File on the TSBroadcaster Computer
4017307 Rev C
27
10 From the Inputs menu, select Add Stream File Input.
The Add File Input window opens.
11 In the Add File Input window, use the following steps to add the new broadcast
file.
a Type the .ts file name in the Input Name field.
b Select the .ts file name from the File Path drop down list.
c Enter the host vendor's recommended file bit rate for the file (typically
a Type the .ts file name in the Input Name field.
b Select the .ts file name from the File Path drop down list.
c Enter the host vendor's recommended file bit rate for the file (typically
500000).
d Click OK.
12 After the screen has refreshed to show the new input stream with the logical
name given, use the following steps to remap the PID.
a Double-click PID 2048 to open the Manage PID window.
a Double-click PID 2048 to open the Manage PID window.
b In the Mapped PID field, enter the new PID, plus 1. Use the information you
recorded in Gather Information to Build the TSBroadcaster Session (on page
c Click Include to save your changes and close the Manage PID window.