Cisco Headend System Release 2.7 Maintenance Manual

Page of 202
 
Chapter 2    Optimize Your System Performance for Downloads and Staging 
 
 
 
64 
4024836 Rev D 
SGM IB carousels are added to the default carousels when Switched Digital Video (SDV) 
is enabled on the system. These carousels provide the mini-carousel discovery files to the 
SDV client to determine the mini-carousel frequencies available. This method of mini-
carousel discovery is used only by SARA SDV clients.   
In addition, SARA SDV client software supports an alternate means of obtaining its mini-
carousel, which does not require downloading the mini-carousel discovery file. If the SDV 
client does not require the mini-carousel discovery file, then all SGM IB carousels should 
be disabled/stopped. If the SARA SDV client uses the mini-carousel discovery file 
method, then you will enable these carousels based on the number of SDV-enabled 
service groups are defined on the system.  
Each SGM IB carousel supports a maximum of 476 SDV-enabled service groups. Refer to 
the DNCS release notes for your system release for more details on enabling these 
carousels. 
The BFS IB total includes CAM IB, but does not include any SGM IB carousels. 
The servicegroupmap.dat file is distributed using the OOB carousel. With systems 
expanding the number of service groups and/or number of QAMs per service group, the 
default recommendation may need to be increased for better service group discovery. The 
following table provides some guidelines on when to increase this rate. 
Number of Service 
Groups  
Number of QAMs per 
Service Group   
Recommended Rate 
< 400   
16 
50 Kbps 
< 800 
50 Kbps 
400 – 800 
16 
100 Kbps 
800 – 1600 
100 Kbps 
800 – 1200 
16 
150 Kbps 
1600 – 2400 
150 Kbps 
 
Note: 150 Kbps is the maximum recommended rate for the OOB carousel to ensure 
sufficient QPSK downstream bandwidth for other OOB messaging.  
For systems that surpass the above number of service groups and QAM combinations, 
DNCS SR 4.2.1.30 (and later) allows you to select the number of QAMs that are included 
in the servicegroupmap file. The following table provides our rate recommendations, 
assuming that each service group is limited to 3 QAM carriers in the servicegroupmap 
file.   
Number of Service 
Groups  
Number of QAMs per 
Service Group   
Recommended Rate 
< 2000   
50 Kbps 
2000 – 4000 
100 Kbps 
4000 – 6000 
150 Kbps