Cisco Headend Digital Broadband Delivery System Maintenance Manual
Chapter 2 Optimize Your System Performance for Downloads and Staging
44
4024836 Rev D
Field
Recommended Value
De-Authorization Time-out Period
(days)
30
Important: If this value is too large, it could
Important: If this value is too large, it could
interfere with the total number of authorization
entries that can be added to the podData file and
could also interfere with the binding of the
CableCARD module/host pairs.
MaxKeySessionPeriod
(decaseconds for SMode)
(minutes for MMode)
(minutes for MMode)
SMode: 10 (decaseconds)
MMode: 10 (minutes)
MMode: 10 (minutes)
Maximum Host Change Count
Allowed
Any number; default = 99 (unlimited)
The maximum number of times that a CableCARD
The maximum number of times that a CableCARD
module is allowed to autobind with a different host.
When the CableCARD exceeds this limit, it is no
longer allowed to autobind with a different host.
The default number, 99, allows an unlimited
The default number, 99, allows an unlimited
number of autobindings.
RF Output (channel)
Value is based on the site's individual preference.
Typically, if the site uses channel 3 for DHCTs, it
should also use channel 3 for CableCARD host
devices
Card Authorization Phone
Number
Phone number that subscribers should call when
they need assistance. You can enter up to 20
alphanumeric characters (including spaces) in this
field.
Maximum Bindings Within
Authorization Time-Out Period
1500
The maximum number of SCC hosts and
The maximum number of SCC hosts and
CableCARD modules that you can bind during a
staging period (defined by the Authorization Time-
Out Period).
This value cannot be changed from the Server
This value cannot be changed from the Server
Configuration window. You must use the
modCCardSTagingLimit script to modify this value.
For more information, refer to Change the
CableCARD Module Staging Limit (part number
4020737).
The following fields are displayed in the DNCS GUI's Set CableCARD MMI Copy
Protection screen.