Cisco Headend System Release 2.7 Installation Guide
4040195 Rev B
17
Post-Soak Instructions
Post-Soak Instructions
Important: There is absolutely NO BACKOUT AFTER THESE INSTRUCTIONS ARE
EXECUTED.
1 Open an xterm window on the DNCS.
2 Log into the system as root:
EXECUTED.
1 Open an xterm window on the DNCS.
2 Log into the system as root:
a At the prompt, type
su -
and press Enter.
b Type the root password and press Enter.
3 Type metaattach d500 d400 and press Enter. The d400 submirror attaches to
the d500 mirror.
4 Type metaattach d503 d403 and press Enter. The d403 submirror attaches to
the d503 mirror.