Cisco Headend System Release 2.7 Installation Guide
Roll Back the Application Server
4038415 Rev A
97
Roll Back the Application Server
If you have upgraded your V240 or V245 Application Server as part of this upgrade,
and have already rolled back the DNCS, follow these instructions to roll back the
Application Server.
and have already rolled back the DNCS, follow these instructions to roll back the
Application Server.
Notes:
To roll back an Ultra 5 or Sun Blade 150 Application Server, you will have to
restore the file system from tape.
restore the file system from tape.
If you have properly followed the instructions so far, the Application Server
should be at an ok prompt.
should be at an ok prompt.
1 Type boot and press Enter to boot the Application Server.
2 Insert the CD labeled DBDS Maintenance CD into the CD drive of the
2 Insert the CD labeled DBDS Maintenance CD into the CD drive of the
Application Server.
3 Log onto the Application Server as root user.
4 Open an xterm window on the Application Server.
5 Type the following command and press Enter. A confirmation message appears.
4 Open an xterm window on the Application Server.
5 Type the following command and press Enter. A confirmation message appears.
/cdrom/cdrom0/s3/backup_restore/make_d700_bootable
6 Type y and press Enter. The system displays a message about rebooting the
system.
7 Type y and press Enter. The Application Server reboots.
8 When the CDE login window appears, log onto the Application Server as root
8 When the CDE login window appears, log onto the Application Server as root
user.
9 Open an xterm window on the Application Server.
10 Type the following command and press Enter to verify that the old Application
10 Type the following command and press Enter to verify that the old Application
Server package is installed.
pkginfo –l SAIapsrv
11 Is the software version correct?
If yes, continue with the rollback by going to step 12.
If no, call Cisco Services for assistance.
12 Type the following command and press Enter to run a script that creates
metadevices for disk mirroring.
/cdrom/cdrom0/s3/backup_restore/make_d500_bootable
13 At the confirmation message, type y and press Enter. The script reconfigures the
mirrored devices and displays a message about rebooting the system.