Cisco Headend System Release 2.7 Installation Guide
Install the Application Server Software
4038415 Rev A
53
13 Type the following command and press Enter. A confirmation message appears.
install_pkg
14 Type y and press Enter. The system lists some configuration parameters of
system components and asks that you confirm their accuracy
15 Refer to Obtain Application Server System Configuration (on page 17) and
verify that the configuration parameters are listed correctly. Then, press c to
continue. The system installs the Application Server software.
Note: If you have to change any parameters, follow the on-screen instructions to
do so. Only in rare cases will you have to modify a parameter.
continue. The system installs the Application Server software.
Note: If you have to change any parameters, follow the on-screen instructions to
do so. Only in rare cases will you have to modify a parameter.
16 After the upgrade has completed, follow these instructions to eject the CD.
a Type the following command and press Enter.
cd /
b Type the following command and press Enter.
eject cdrom
17 Check the log file for errors. Go to the next procedure in this chapter if the log
file indicates that the Application Server software installed without error.
Notes:
Notes:
The installation log file is in the /var/sadm/system/logs directory of the
Application Server.
Application Server.
The log file for the Application Server software is SAIapsrv_[version
#]_install.log.
#]_install.log.
Call Cisco Services for assistance if the log file reveals errors.