Cisco Headend System Release 2.7 Installation Guide

 

64 

4038415 Rev A 

After installing the software onto the DNCS, complete the following steps to reboot 
the DNCS and Application Server. 
1  Choose one of the following options: 

 

If you are using a Cisco Application Server, open an xterm window (if 
necessary) on the Application Server. 

 

If you are using a Rovi Corporation Application Server, skip to step 4. 

2  Complete the following steps to log on to the xterm window as root user. 

a  Type su - and press Enter. The password prompt appears. 
b  Type the root password and press Enter. 

3  From the xterm window on the Application Server, type the following command 

and press Enter. The Application Server shuts down. 

4  If necessary, open an xterm window on the DNCS. 
5  Complete the following steps to log on to the xterm window as root user. 

a  Type su - and press Enter. The password prompt appears. 
b  Type the root password and press Enter. 

6  From the xterm window on the DNCS, type the following command and press 

Enter. The DNCS reboots and the CDE Login window appears. 

7  Log on to the DNCS as dncs user. 
8  At the ok prompt on the Cisco Application Server, type boot and then press 

Enter. The Application Server reboots. 

9  Log on to the Application Server as dncs user. 
10  As root user on the DNCS, type the following command and press Enter. 

11  Does the output from step 10 show that Informix is online? 

 

If yes, you have completed this procedure. Go to the next procedure in this 
chapter. 

 

If no, type the following command and press Enter. Then, repeat steps 10 
and 11. 

Note:  If Informix does not come online, contact Cisco Services for assistance.