Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations Data Sheet
Prisma II bdr Digital Reverse 2:1 Dual Multiplexing System
for High Density Installations
for High Density Installations
4
Module Specifications
2:1D Transmit Processor
Units
Notes
RF Input Level Requirements
dBmV/Hz
See Link Performance Section
RF Input Return Loss
dB
16
Input RF Variable Attenuation Range
dB
0 to 10
Power Consumption (maximum)
W
11
Data Output to Laser Module
Gbps
2.5
A/D Input Test Point
dB
-20
± 0.5
1
Laser Module
Units
Notes
Data Input from 2:1 Transmit Processor
Gbps
2.5
Optical Wavelength
nm
1550 ITU grid 200 GHz spacing
1550 non-ITU
1310 nm
Power Consumption (maximum)
W
8 (1550 nm ITU)
6.5 (1550 non-ITU) & (1310 nm)
Optical Output Power (modulated)
dBm
0 or 7
Optical Interface
SC/APC Connector
2:1D Receive Processor
Units
Notes
Data Input from Receiver Module
Gbps
2.5
RF Output Level
dBmV/Hz
See Link Performance Section
RF Output Return Loss
dB
16
Output RF Variable Gain Control Range
dB
0 to -10
Power Consumption (maximum)
W
15
RF Output Test Point
dB
-20 (
± 0.5 dB)
Receiver Module
Units
Notes
Optical Input Power Range: SR module
dBm
-5 to –22
2
Optical Input Power Range: ER module
dBm
-10 to -29
2
Data Output to Laser Module
Gbps
2.5
Power Consumption (maximum)
W
1
Optical Interface
SC/APC connector
Mechanical
Units
Notes
Operating Temperature Range (ambient)
°C
°F
-40 to +65
-40 to +149
3,4
Physical Dimensions (any Processor with
2 Receiver or 2 Laser Modules)
Depth
2 Receiver or 2 Laser Modules)
Depth
in.
cm
9.8
24.9
Width
in.
cm
2.1
5.3
5.3
Height
in.
cm
7.6
19.3
Weight
lb
kg
5.0
2.3
2.3
Notes:
1. Test point level is –20 dB referenced to the RF input with attenuator set at 0 dB.
2. System designs should consider the effects of wavelength dispersion in long fiber lengths. This can result in up to 2
1. Test point level is –20 dB referenced to the RF input with attenuator set at 0 dB.
2. System designs should consider the effects of wavelength dispersion in long fiber lengths. This can result in up to 2
dB loss of Rx sensitivity over a 100 km distance.
3. Recommended for use only in non-condensing environments.
4. Receive Processor operating temperature range is –10 to +65°C.
4. Receive Processor operating temperature range is –10 to +65°C.