Cisco Model 6944 and 6940 Node bdr Dig Rev 2 1 Mux System for Prisma II Data Sheet

Page of 7
 
 
 
 
 
 
Description 
The Prisma II
 “carrier-class” platform supports Scientific-Atlanta’s 
revolutionary baseband digital reverse technology.  The Prisma II 
bdr
 Digital Reverse 4:1 Multiplexing System provides a unique 
approach for incorporating cost-effective network redundancy. 
 
At the transmit end of the system, typically in a hub or remote 
terminal, four analog reverse path signals are input to a two slot 
wide Transmit Processor.  The Transmit Processor converts each 
signal to a baseband digital data stream and time division 
multiplexes the four streams into a single data stream.  The data 
stream is split to enable routing for redundant optical transport.  
One (non-redundant application) or two (redundant application) 
Laser modules installed within the Transmit Processor frame 
convert the high data rate stream to an optical signal for 
transmission at either 1310 nm or 1550 nm wavelengths.  1550 nm ITU grid wavelengths are used for Dense 
Wave Division Multiplexing (DWDM) applications. 
 
On the receive end, typically in a large hub or headend, one or two Receiver Modules located in the Receive 
Processor frame receive the optical signal and perform conversion back to the baseband data stream.  The 
Receive Processor de-multiplexes the data stream and converts the four resultant data streams back to analog 
reverse path signals for routing to termination equipment. 
 
Features 
  High-performance baseband digital reverse technology with 12-bit encoding and advanced digital signal 
processing enables transmission of analog video and high-order digital modulation signals (e.g.,16 QAM and 
64 QAM) 
  4:1 time division multiplexing reduces requirements for costly 1550 nm ITU transmitters from four to one 
  Long reach transmission capabilities eliminate need for optical amplifiers, reducing cost and space 
requirements 
  Capable of sending 96 individual reverse bands over a single fiber 
-leverages 4:1 time division multiplexing for quadrupling fiber capacity 
-compatible with Scientific–Atlanta’s 24 wavelength DWDM system 
  Modular, cost-effective redundancy for reliable, carrier class performance 
  Simplified set-up reduces installation time and expertise requirements 
  Distance and temperature independent link performance simplifies engineering and maintenance 
requirements 
  Space-saving, high-density Prisma II platform increases deployment cost efficiency 
  Extended temperature performance enables Remote Terminal applications 
  High-speed remote control and monitoring via Scientific-Atlanta’s Transmission Network Control System 
(TNCS) 
Optoelectronics 
Prisma II
 
bdr
 Digital Reverse 
4:1 Multiplexing System