Cisco Model D-PCG1000 PowerKEY CAS Gateway Release Notes
Chapter 2 Upgrading the Software
12
4021639 Rev B
5 Type more goqamdata and press Enter. A result, similar to the following output,
appears.
6 Did more than one config file appear?
If yes, keep the xterm window open and go to step 7.
If no, go to Checking the Software Version Associated with the config File
(on page 13).
(on page 13).
7 Do you need to continue to run different versions of software on some
modulators in your network?
If yes, refer to Load Multiple Versions of GoQAM Code (on page 33).
If no, go to step 8.
8 Update the modulators to use the same config file by completing the following
steps:
a From the DNCS Administrative Console, click Element Provisioning and
a From the DNCS Administrative Console, click Element Provisioning and
click QAM. The QAM List window opens.
b Select the modulator, click File and select Open. The Set Up GoQAM
window opens.
c Click Advanced Parameters and modify the configuration file, as needed.
9 Go to Checking the Software Version Associated with the config File
(on page 13).