Cisco Model D-PCG1000 PowerKEY CAS Gateway Release Notes
2
OL-31043-03
About This Software Version
About This Software Version
Netcrypt software version 1.3.9 includes features and enhancements implemented at
the request of our customers. Review this section to learn more about these changes.
Note: For more information about a Netcrypt, such as theory of operation,
instructions for hardware installation, provisioning, or operation, refer to Netcrypt
Bulk Encryptor for Explorer Controller Hardware Installation and Configuration Guide
(part number OL-28808).
the request of our customers. Review this section to learn more about these changes.
Note: For more information about a Netcrypt, such as theory of operation,
instructions for hardware installation, provisioning, or operation, refer to Netcrypt
Bulk Encryptor for Explorer Controller Hardware Installation and Configuration Guide
(part number OL-28808).
What's New in this Release?
Setting PSI Rates for Netcrypt Ports
You can use the psi_rate craft command to override the provisioned PAT and PMT
rates for each port on the Netcrypt.
The ‘help psi_rate’ craft command returns:
NC_HOST>help psi_rate
rates for each port on the Netcrypt.
The ‘help psi_rate’ craft command returns:
NC_HOST>help psi_rate
Description:
Set/Display the PSI override rate value for a port
Command Parameter Entry:
Parameters listed with hex_ are hexadecimal, and are
entered like 0x1f.
entered like 0x1f.
Parameters listed with dec_ are decimal and are entered
like 105.
like 105.
Usage:
psi_rate [port_or_all rate] [port_or_all rate] ...
port is 0 to 3 or all, and rate is 1000 to 15000 or 0 for
provisioned value
provisioned value
PSI Rate Examples
psi_rate 0 3000
psi_rate 0 3000
This sets only port 0 to 3000.
psi_rate all 2000
This sets all ports to 2000.
psi_rate all 2500 3 4000
This sets ports 0, 1, and 2 to 2500, and port 3 to 4000.