Cisco Headend System Release 2.7 Technical References
2
OL-29830-01
Configure the snmpTrapHandler for SR 6.0
Configure the snmpTrapHandler for SR 6.0
1 Log into the DNCS as dncs user.
2 Enter the following command.
2 Enter the following command.
cd /dvs/dncs/Utilities
3 Enter pwd to confirm that you are in the /dvs/dncs/Utilities directory.
4 Enter ./config_snmp_users.
4 Enter ./config_snmp_users.
Note: A dot precedes /config_snmp_users.
Result: Output similar to the following appears.
Important: This output shows that no SNMP traps have been configured on the
system. If output similar to what appears in step 12 is displayed instead, then
SNMP traps are already configured and no further action needs to be taken.
Result: Output similar to the following appears.
Important: This output shows that no SNMP traps have been configured on the
system. If output similar to what appears in step 12 is displayed instead, then
SNMP traps are already configured and no further action needs to be taken.
###################################
Current users:
No known users/communities.
Pending users:
No new users/communities pending.
###############################
a Add a new user/community
d Delete a current user/community
l List known users/communities
c Clear all pending actions
q Quit
Option <q>:
5 Select option a to add a new user/community.
Result: Output similar to the following appears.
User/Community name: public
1 v1
2 v2c
3 v3
q quit
##### The snmpTrapHandler must be bounced for changes to take affect