Cisco Headend Digital Broadband Delivery System Technical References
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
4
4042948 Rev A
EAS Provisioning on the DNCS
EAS Provisioning on the DNCS
The following instructions provide the steps necessary to configure your system for
the national EAS test.
Important: During the course of this procedure, you are asked to select a default
source to which your system will force-tune during the test. This default source
MUST be able to be broadcast in the clear to all of the hubs on your headend.
Note: The screen captures used for this example are from a System Release 4.2
DNCS. Your images may vary somewhat based upon the DNCS code running on
your headend.
1 From the DNCS Administrative Console, click the System Provisioning tab.
2
the national EAS test.
Important: During the course of this procedure, you are asked to select a default
source to which your system will force-tune during the test. This default source
MUST be able to be broadcast in the clear to all of the hubs on your headend.
Note: The screen captures used for this example are from a System Release 4.2
DNCS. Your images may vary somewhat based upon the DNCS code running on
your headend.
1 From the DNCS Administrative Console, click the System Provisioning tab.
2
Click MMM Config.
Result: The MMM Configuration List window opens.
3 Scroll to the bottom of the MMM Configuration List and select Force Tune.