Cisco Cisco Workload Automation 6.3 Installation Guide
183
Upgrading Components
Upgrading the Unix Master
./tesm start
The database modifications are performed when the Master is first started after the installation.
Upgrading the Unix Master from the Command Line
The Unix Master can be installed using the installer program or by installing it from the command line.
To install from the command line:
1.
Copy install.sh to the target machine.
2.
Change the permissions on the install.bin file in the directory to make the file executable:
chmod 755 install.sh
3.
Open a command prompt window and enter:
# sh ./install.sh -i console
4.
Press Enter.
The Introduction panel displays.
5.
Click Next.
The Readme panel displays.
6.
Verify that you have already done the prerequisites that are listed on the Readme screen.
If you have not completed all of the listed tasks, click Cancel to end the installation procedure and complete the
listed prerequisites before beginning the upgrade procedure again. If you have completed the prerequisites,
listed prerequisites before beginning the upgrade procedure again. If you have completed the prerequisites,
7.
Click Next.
The Choose Install Folder panel displays.
8.
Enter the directory path to the Master folder where the Master files were installed during the original installation of
the Master.
the Master.
The Upgrade program cannot proceed without knowing where the Master files it is modifying are located. You can
manually enter the directory path or click Choose to browse through the file directory to the Master folder.
manually enter the directory path or click Choose to browse through the file directory to the Master folder.
A confirmation message verifies that the required Master directories are in the specified location.
9.
Click OK.
If the Upgrade program cannot find the Master files at the specified location, an error message displays and the
installation process is aborted as soon as you acknowledge the error message.
installation process is aborted as soon as you acknowledge the error message.
Once the directory path is confirmed, the Pre-Installation Summary panel displays.
10.
Click Install.
During the upgrade process, a progress bar is displayed.
When the upgrade is complete, the Install Complete screen displays.
11.
Click Done.
12.
Return to the location where you copied the install.sh file and delete the install.sh file.