Cisco Cisco DOCSIS EuroDOCSIS Transponder for Compact Amplifiers and Nodes Data Sheet
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
Data Sheet
Features (continued)
Table 1.
Key Features
Feature
Description
Ethernet Port
Provides local access to an embedded configuration page for control.
Optical Tamper Switch
Embedded in transponder, reports on the status of the node (open or closed lid).
Cable Modem LEDs
Display the registration status of the transponder in the DOCSIS network.
Embedded Web Page
Displays both cable modem and HMS node data gathered from the transponder.
Optional HSIA testing is supported through the web page and can be accessed either
locally via the Ethernet port or remotely via a web browser application.
Optional HSIA testing is supported through the web page and can be accessed either
locally via the Ethernet port or remotely via a web browser application.
eMTA VoIP Testing (Optional)
When configured as a VoIP test point, the transponder is capable of receiving and
originating calls, determining MOS scores, and measuring RTP statistics through the
embedded firmware. At the end of each call, the test results are available through
RTCO Extended reports.
originating calls, determining MOS scores, and measuring RTP statistics through the
embedded firmware. At the end of each call, the test results are available through
RTCO Extended reports.
Some of the measured parameters are MOS listening quality, MOS conversion quality,
R factor, external R factor, network packet loss, packets discarded due to jitter, RTP
round trip delay (ms), and end system delay (ms).
R factor, external R factor, network packet loss, packets discarded due to jitter, RTP
round trip delay (ms), and end system delay (ms).
Product Specifications
Table 2.
Product Specifications
Specification
Value
General
DOCSIS
Version 2.0
HMS Monitoring Protocol
SNMP v1
DOCSIS Monitoring Protocol
SNMP v1, v2, v3
RF Interface
Internal
RF Internal Padding
Configurable JXP pad for 15 dB upstream
Ethernet Interface
RJ45
Operating Temperature
-40 to +75°C
Humidity
10 to 90% (non-condensing)
EMI/EMC
FCC Part 15 Class A, CE EN50022 Class A
RF Transmit/Receive
Tx Frequency Range
5 to 42 MHz
Tx Output Power
+8 to +58 dBmV
Rx Frequency Range
88 to 860 MHz
Rx Input Level
-15 to +15 dBmV
Channel Bandwidth
6 and 8 MHz
Ordering Information
Table 3.
Ordering Information
Description
Part Number
GS7000 DOCSIS Status Monitor Transponder
4036793
Downstream RF Cable Kit
4038028