Cisco Cisco DOCSIS EuroDOCSIS Transponder for GainStar Nodes and Amplifiers Installation Guide
Device Configurations
1. Click the check box after each value to enable alarm on it.
2. Input the desired value after each property to trigger the alarm.
3. Click Apply.
Result: Alarms are triggered once the configured major/minor low value and/or the
2. Input the desired value after each property to trigger the alarm.
3. Click Apply.
Result: Alarms are triggered once the configured major/minor low value and/or the
minor/major high value are exceeded.
Note: The gap between the major and minor values can’t be smaller than the
hysteresis value. Exceeding the limit may cause value returns to the previous setting.
Device Setting
1. Click Device on the main menu.
2. Click Setting in the left panel.
3. Result: The device setting window is displayed.
2. Click Setting in the left panel.
3. Result: The device setting window is displayed.
OL-31165-02
49