Cisco Cisco DOCSIS EuroDOCSIS Transponder for Compact Amplifiers and Nodes Installation Guide
Chapter 3 Operation
Reverse RF
1. Click Device on the main menu.
2. Click Reverse RF in the left panel.
3. Result: The reverse RF setting window is displayed.
2. Click Reverse RF in the left panel.
3. Result: The reverse RF setting window is displayed.
The reverse RF setting window enables you to configure 3-state switch of the reverse
RF port 1 and 2.
1. Click on the drop-down box after Tri-State Switch A/B to choose attenuation
1. Click on the drop-down box after Tri-State Switch A/B to choose attenuation
value in dB.
Note: The above values are defined by the tri-state switch and the reverse
attenuator, thus only specified values are allowed as below.
2. Click Apply.
48
OL-32436-01