Cisco Cisco DOCSIS EuroDOCSIS Transponder for GainStar Nodes and Amplifiers Installation Guide
Chapter 3 Operation
Transponder Configurations
Introduction
The Transponder menu enables you to observe and configure the configurations of
the transponder including its IP address, device files, firmware upgrade, DOCSIS
mode, and security management.
Configuration Data
1. Click Transponder on the main menu.
2. Click Configuration in the left panel.
2. Click Configuration in the left panel.
Result: The configuration data window is displayed.
The configuration data window enables you to configure the name and location of
the transponder and the IP address of the TFTP server.
Note: IEP mode enables identifying the device through device file, while the
Note: IEP mode enables identifying the device through device file, while the
Standalone mode allows you to manually choose the device. For GainStar Amplifier
and Node, choose standalone mode in case your device is not recognized.
Note: The TFTP server stores the firmware image and backups all the logs and
Note: The TFTP server stores the firmware image and backups all the logs and
records of the transponder. For local craft, the TFTP server IP address field displays
the IP address of the local craft computer. Thus users can obtain firmware and
download/upload logs and records using the local craft computer.
To change the displayed fields, input your desired values and click Apply.
To change the displayed fields, input your desired values and click Apply.
36
OL-32436-01