Cisco DTA Control System (DTACS) 1.2 User Guide
Chapter 3 Network Elements
26
Field
Description
1st Source IP
Address
Address
Enter the first multicast IP address for the source, if applicable.
Note: If the destination IP address is multicast, then at least one source IP
address must be specified.
address must be specified.
2nd Source IP
Address
Address
Enter the second multicast IP address for the source, if applicable. Use
this IP address if you are using source redundancy.
this IP address if you are using source redundancy.
3rd Source IP
Address
Address
Enter the third multicast IP address for the source, if applicable. Use this
IP address if you are using source redundancy.
IP address if you are using source redundancy.
Create a PassThru PID Route
Follow these instructions to add a passthru PID source to a PID route in the DTACS.
1 In the Network Elements section, click PID Route Provisioning. The PID Route
1 In the Network Elements section, click PID Route Provisioning. The PID Route
Provisioning window opens, listing the PID routes available to the DTACS.
2 Click View/Define Source. The User Defined Sources for PID Routes window
opens.
3 Click Add. The Add User Defined PID Route Source window opens.
4 Enter information as described in PassThru PID Route Source Settings.
5 Click Save. The DTACS creates the PID routes for the sources you entered.
4 Enter information as described in PassThru PID Route Source Settings.
5 Click Save. The DTACS creates the PID routes for the sources you entered.
Add a PassThru PID Definition to a User-Defined Source
Follow these instructions to add a passthru PID definition to a user-defined source in
the DTACS.
1 In the Network Elements section, click PID Route Provisioning. The PID Route
the DTACS.
1 In the Network Elements section, click PID Route Provisioning. The PID Route
Provisioning window opens, listing the PID routes available to the DTACS.
2 Click View/Define Source. The User Defined Sources for PID Routes window
opens.
3 Click Manage Source PIDs. The PID Definitions for User Defined Sources
window opens.
4 Click Add. The Add PID Definition for User Defined Source window opens.
5 Select the Source Name from the drop-down list.
6 Enter an Output PID.
7 Click Save. The DTACS creates the PID definition for the source you selected.
5 Select the Source Name from the drop-down list.
6 Enter an Output PID.
7 Click Save. The DTACS creates the PID definition for the source you selected.
Edit a PassThru PID Route Source
Follow these instructions to edit a passthru PID source in the DTACS.
1 In the Network Elements section, click PID Route Provisioning. The PID Route
1 In the Network Elements section, click PID Route Provisioning. The PID Route
Provisioning window opens, listing the PID routes available to the DTACS.
2 Click View/Define Source. The User Defined Sources for PID Routes window
opens.