Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide
QPSK Demodulator Settings
Use the following fields when you manage a QPSK demodulator in the DNCS.
Field
Description
Port
The port on the QPSK modulator from which this
demodulator receives data.
demodulator receives data.
Note: This field is not editable. The only time you can
change this field is when creating a QPSK demodulator.
change this field is when creating a QPSK demodulator.
Node Set Name
The node set that you want to associate with this
demodulator.
demodulator.
Important: We recommend that you assign each
demodulator to a unique node set.
demodulator to a unique node set.
Frequency
The RF input frequency assigned to this modulator. You
can enter a value from 8 to 26.5 MHz, based on your
plant design.
can enter a value from 8 to 26.5 MHz, based on your
plant design.
Important: We recommend the following guidelines:
Set this value to equal the service channel
frequency of the associated modulator. (The
service channel frequency of the QPSK
modulator is shown in the Advanced Parameters
tab of the Set Up QPSK modulator window.)
service channel frequency of the QPSK
modulator is shown in the Advanced Parameters
tab of the Set Up QPSK modulator window.)
Set all demodulators associated with the same
modulator to the same frequency.
Page 1013