Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Use the following fields when you manage a hub in an RCS headend.

Hub Name

The name you will use to identify this hub.

You can use up to 15 alphanumeric characters.

Example: If this hub is in Headend 1, which is in the Denver site, you might use
Dnvr_HE1_Hub1. 

Hub ID

The number you will use to identify this hub.

You can use up to eight digits. 

Important: Be sure to use a number that is consistent with the numbering
scheme used on your network map. You will not be able to modify this field later.

Headend

The headend where this hub is located.

Time Zone

The time zone used where this hub resides.

DST Zone ID

If this hub resides in an area that uses daylight saving time, select the appropriate
DST Zone ID.



For more information on DST Zone ID, see the DST Zone ID field in 

.



For more information on DST rules, see 



To manage time correctly on your network, you must install the Digital

System Time Kit, if not installed previously. Refer to 

DBDS System Time

Installation and Maintenance Guide

 (part number 4011510) for more

information. To obtain a copy of this publication, see