Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Add a Hub to an RCS Headend

Quick Path: DNCS Administrative Console > DNCS tab > System Provisioning tab > RNCS Sites > Site
Summary > Hubs > Add Hub

Important: Follow this procedure only if you use an RCS. If you do not use an RCS,

follow a different method

add a hub to your system.

After you have added headends to your RCS, next add hubs. A hub represents the point at which out-of-band
(QPSK-modulated) frequencies combine with inband (QAM) frequencies to be transmitted to subscribers through
the radio frequency (RF) network.

Page 1088