Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

After a VASP entry has been saved in the DNCS, you can modify only the following parameters:



The name of the VASP entry



The status of the VASP entry (In Service or Out of Service)

Important: To change any other parameters, you must delete the VASP entry, and then re-add it to the DNCS,
using the new information.

1.

On the DNCS Administrative Console, click the DNCS tab.

2.

Click the Network Element Provisioning tab.

3.

Click VASP. The VASP List window opens.

4.

Click once on the row containing the VASP entry you want to modify.

5.

Click File > Open. The Set Up VASP window opens for the VASP entry you selected.

6.

To change the name of this VASP entry, click in the Name field and change the name as desired. You

can use up to 80 alphanumeric characters.

Note: We recommend that you establish a naming scheme that allows you to easily identify the type of
server associated with each VASP entry, the hub where the server resides, and the QAM modulator that
the server feeds.

Example: A name of VODhub1Q43 would represent a VOD server on Hub 1 that uses the QAM
modulator whose IP address ends in 43.

7.

To change the status of this VASP entry from In Service to Out of Service, or vice versa, click the

desired option so that is selected (yellow).

8.

When you finish making changes, click Save. The system saves the new VASP information in the DNCS

database and closes the Set Up VASP window. The VASP List window updates to include the new VASP
information.

9.

Update your network map to reflect these changes.

10.

Do you need to modify another VASP entry?



If yes, repeat this procedure from step 4.



If no, click File > Close to close the VASP List window and return to the DNCS Administrative

Console.