Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide
on your network map.
If the corresponding BFS QAM modulator is not connected to a SWIF transmit
card, you will need the Output Transport Stream ID when you set up the
modulator.
card, you will need the Output Transport Stream ID when you set up the
modulator.
If necessary, change the PID (program ID) assignments to each stream by
clicking PAT Configuration. These assignments are typically made when your
system is upgraded and should not be altered unless you are adding a
third-party application. For assistance supporting third-party applications,
refer to
clicking PAT Configuration. These assignments are typically made when your
system is upgraded and should not be altered unless you are adding a
third-party application. For assistance supporting third-party applications,
refer to
.
Page 135