Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Page of 1878
Define Generic QAM RF Carriers
After you have set up the generic QAM basic parameters and defined its GbE input ports, your next step is to
define the RF carriers for the generic QAM.
1.
In the path at the top of the window, click Generic QAM. The Generic QAM window opens for this
generic QAM modulator.
2.
Click RF Carriers. The RF Carrier Parameters window opens.
3.
Use the following fields when you manage the RF carriers for a generic QAM.
Field
Description
Transport Stream ID
A unique number to identify the transport stream going from this generic QAM
out to the hubs in your system. 
You can use any number from 0 to 66,365.
Modulation
The type of modulation this generic QAM uses.
Frequency
The frequency of the channel you will use to send data from this generic QAM
to the hubs in your system
Continuous Wave
Mode
Determines whether the generic QAM produces an unmodulated RF carrier. 
Enable this option to produce an unmodulated RF carrier. 
This is useful when performing testing. 
Disable
Determines whether you can set up additional sessions on an RF output port
on the generic QAM. 
Enable this option to prevent the DNCS from setting up any additional sessions
on this RF carrier. (Existing sessions are not affected and continue to function
as expected.) 
This may be helpful when performing plant maintenance or, in the rare event,
when a port fails.
Interleaver Depth
Determines the depth of interleaving for the QAM. 
Available only if you are using Overlay technology.
4.
Click Save. The system begins saving the data to the database and, when finished, displays Done in
the status bar at the bottom of the window.
5.
Have you provisioned the generic QAM?
.
If no, leave this window open and provision the generic QAM modulator. When you have
provisioned the modulator, go to Activating the Generic QAM.
Note: For information on provisioning the generic QAM, refer to the documentation provided by
the manufacturer of the generic QAM.
Page  316