Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Use the following fields when you manage devices in the DNCS.

Admin Status

Defines the administration status of the DHCT.

Click the arrow to select one of the following options
from the Admin Status list:



Out of Service



In Service One Way



In Service Two Way  select for CableCARD

modules



Deployed

DHCT Type

Defines the device type you are adding.

Select the device type from the drop-down list.

Boot Page

Boot page for this device (if used). Leave blank if you are
using bootloader

Primary VASP Name

Primary VASP for this device.

Click the arrow to select the Primary VASP Name from
the drop-down list (leave blank if you are using
bootloader).

S/W Table of Contents

The TOC file specific to this device type.

Click Select to browse to the correct toc file for this
device (leave blank if you are using bootloader).

When you load the EMMs into the DNCS for a shipment
of devices, a table of contents file (TOC file) is created
and is available to your billing system. The TOC file
contains the serial numbers, the MAC addresses, and the
type (model and hardware revision) of all devices in the
shipment. 

Billing ID

Billing ID of the device.

IP Address

IP address of the DNCS server.

IPV6 Address

If you have the IPv6 feature enabled, this field displays
the IPv6 address of the DHCT. It is a read-only field.

DHCT Serial Number

Serial number of the device.

