Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Use the following fields when you manage a third-party content source in the DNCS.

Distribution

Defines how the source is distributed:



Default - Distributes the source to all hubs.



Hub - Distributes the source to the specific hub defined in Hub Name.

Hub Name

The hub name that receives content.

This option is only activated if you selected the Hub option in the Distribution
field.

MPEG Program
Number

The MPEG program being fed into the transport stream.

This number must match the program number of the MPEG source as defined by
your content provider.

Channel Center
Frequency

The channel frequency of the channel you will use to send data from this
modulator to the hubs on your system. 

You can enter a value in 6 MHz increments from 91 to 867.

Click for a 

.

Modulation Type

The type of modulation this modulator uses.

Example: If this modulator uses ITU J.83 Annex B modulation, select ITU J.83
Annex B (6 MHz).

Modulation

The modulation method this modulator uses.

Example: If this modulator uses 256 QAM, select 256-QAM.