Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Use the following fields when you manage a bootloader source in the DNCS.

Source Name

Enter a name to describe this source.

Example: Enter Bootloader2.

Source ID

We recommend that you select an even number that is not in use and
that is greater than 200 to correspond with our naming convention.

Source Type

Select Bootloader.

Transport Type

Select the In-band option.

Data Rate

The data rate depends on several factors, including the DHCT type, the
BFS QAM setting, and the available bandwidth. When you make this
decision, select a rate between 1.00 and 3.00 Mbps. 

For more information on carousel data rates, refer to 

Recommendations

for Data Carousel Rate Management Technical Bulletin 

(part number

716377).

Block Size

Type 4000.

Indication Interval

Type 100.

Source

Select the enable option.

Note: If your system uses the RCS feature, skip this field.

Hosts

Select the same hosts that the main Bootloader source uses in the 
Available Hosts column and click the arrow to move those sources to
the Selected Hosts column.



