Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide

Use the following fields when you manage the RF output ports for an UpConverter in the DNCS.

Transport Stream ID A unique number that identifies the transport stream going from this

UpConverter to select hubs. 

Modulation

The modulation that the UpConverter modulator uses. 

Example: If the UpConverter uses 64 QAM modulation, select 64-QAM. 

Channel Center
Frequency (MHz)

The frequency of the channel that you will use to send content from this
UpConverter to select hubs.

Click to see a table of 

Available Hubs

The hubs available to this UpConverter.

Select a hub in the Available Hubs list and then click Add. The hub you
selected moves from the Available Hubs list to the Selected Hubs list.

Repeat this process until all of the hubs that will receive the output of this
UpConverter appear in the Selected Hubs list.



Use the following fields when you manage the connections for an UpConverter in the DNCS.

Headend Name

The headend in which the device that feeds the UpConverter resides.

Device Type

The type of device being used to send data to this UpConverter (for example,
IF GoQAM modulator).

Device Name

The name previously defined for the device being used to send data to this
UpConverter.

The options that appear depend on what you selected for the Device Type. As you finish completing
this window, keep in mind that the information being requested is about the IF GoQAM modulator
that feeds this UpConverter.



