Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 User Guide
Upload Session Data File for Table-Based QAM Modulators
Uploading session data from a file is the preferred method for populating this data on the DNCS.
Follow these steps to upload a new session data file for new table-based QAM modulators.
1.
Ensure the comma-delimited text file containing the session data for table-based QAMs is loaded on
the DNCS. Make sure you know the path to this file.
2.
From the Table-Based QAMs List window, select the table-based QAM you need to edit.
3.
Click Configure Session Data. The Table-Based Session Data window opens.
4.
Click File load.
5.
Click the Browse button.
6.
From the File Upload window, navigate to the location where the session data file for this table-based
QAM is stored and click Open. The path and the file you selected is populated in the Select the file to
be uploaded field.
be uploaded field.
7.
Click the Load button.
8.
Wait for confirmation that all of the records were loaded with 0 errors. Click OK in the confirmation
window.
9.
Click Save changes.
Important: You must click Save changes to save the session data. Clicking OK in the previous step
does not automatically save the session data.
does not automatically save the session data.
10.
Do you need to upload new session data for another table-based QAM?
If yes, click Table-Based QAMs List from the navigation path at the top of the window. Then
repeat this procedure from step 2.
If no, you have completed this procedure. If necessary, change the RF parameters (TSIDs) for
the QAM sessions you edited.
Page 933