Manualsbrain.com
  1. Manuals
  2. Brands
  3. Cisco
  4. DNCS System Release 2.8 3.8 4.3
  5. Installation Guide

Cisco DNCS System Release 2.8 3.8 4.3 Installation Guide

Download
Page of 58
 
Appendix A 
Verify the Install Package Exists on the DNCS 
36 
4031324 Rev B 
Check for the Install Tool on the DNCS 
Important: If you are using SR 2.7/3.7/4.2, this procedure is not required because 
the install tool (install_pkg) is pre-packaged within the software. 
 
Checking for install_pkg on the DNCS 
1  From an xterm window, type cd /usr/sbin and press Enter. 
2  Type ls and press Enter. 
3  Is the install_pkg file present on the DNCS? 
 
If yes, resume your installation procedures. 
 
If no, go to step 4. 
4  Log on to our FTP server. 
Notes: 
 
The address of the server is ftp.sciatl.com or 192.133.243.133. 
Note: The address for the FTP server is subject to change. If you are unable to 
reach the FTP server, please contact Cisco Services for the latest address. 
 
The username is anonymous. 
 
The password is the email address of the person logging in. 
5  Choose one of the following options to navigate to the directory in which the file 
is located: 
 
If you are inside our firewall, type 
cd /external_pub/scicare/RELEASED/SR2.2Patches. 
 
If you are outside our firewall, type 
cd /pub/scicare/RELEASED/SR2.2Patches. 
6  Type bin and press Enter. The system sets the ftp transfer mode to binary. 
7  Type hash and press Enter. The system configures itself to display hash marks 
that show file-transfer progress. 
8 
Type get install_pkg and press Enter. The system begins copying files into the 
/export/home/dncs/download/directory on your DNCS. 
9  Type get install_pkg README_3.0.1.3p2EP1.txt and press Enter. The system 
begins copying files into the /export/home/dncs/download/directory on your 
DNCS. 
10  Type bye and press Enter to log out of our FTP server. 
11  Continue with the installation procedures.