Cisco DNCS System Release 2.8 3.8 4.3 Design Guide
4000358 Rev B
Configuring Mixed DOCSIS/DAVIC on the DNCS
4-5
Configure Mixed DOCSIS/DAVIC,
Continued
7.
Click OK.
Result: The system returns to the QPSK Modulator window and the Cancel
Result: The system returns to the QPSK Modulator window and the Cancel
button changes to Close. The DHCTs can now boot in Mixed
DOCSIS/DAVIC mode at startup.
8.
Repeat steps 3 through 7 for each bridge that you need to configure.
9.
Click Close to return to the QPSK/CMTS list window.
10. Leave the QPSK/CMTS list window open.
11. Your next step is to send a DCM Updated message to the selected DHCT
11. Your next step is to send a DCM Updated message to the selected DHCT
types and bridges to allow the DHCTs to boot in the Mixed DOCSIS/DAVIC
mode. Go to Sending a DCM Updated Message, next in this section.
Sending a DCM Updated Message
Complete the following steps to send a DCM Updated message for the affected
bridges.
1.
On the QPSK/CMTS list window, click the File menu and select DCM
Updated message.
Result: The DCM Updated message window opens.
Result: The DCM Updated message window opens.