Cisco Transaction Encryption Device (TED) IV Technical References

Page of 12
 
 
 
Upgrading the TED Using the 
Universal TED Updater  
Technical Reference 
Overview 
Introduction 
The Universal  TED Updater includes  TED application software and firmware  for 
all TED platforms. This includes: 
 
TED 4 on a UCS2xx-M server  with an nCipher  HSM card 
 
TED 3 on a Netra 4200X server  with a Sun/Oracle SCA6000 HSM card 
 
TED F/X with a Rainbow  CryptoSwift CryptoGraphic  Accelerator  card 
After installing  Release 1.x.y of the Universal  TED Updater onto the RCAS, 
DNCS, EC, or any system with a directly  connected  TED, you must then push the 
application to the TED server.  This document provides  all of the necessary 
procedures.   
Purpose 
This document describes  the installation  and operation  of the Universal  TED 
Updater. The Universal  TED Updater (SAIUniTedUpd) is a maintenance  utility to 
be installed on an RCAS, DNCS, EC, or any system with a directly connected 
TED. SAIUniTedUpd is a replacement  for the old TED updater package 
(SAITedUpd).  
Important: The Universal  TED Updater can be installed if and only  if the old  TED 
updater package (SAITedUpd) is removed. 
If the old TED updater package (SAITedUpd) is installed on the current system, 
SAIUniTedUpd will not install, and subsequently  will instruct the operator to 
remove  the SAITedUpd package.  
Once installed, execution  of the Universal  TED Updater allows the operator  to 
remotely  update the connected  TED. It should be noted, that if an old TED 
updater is executed prior to the Universal  TED Updater execution,  the latter could 
refuse to upgrade the TED. More  importantly, however,  this type of exception 
does not compromise  system integrity  or functionality  whatsoever.  In fact, this 
behavior  is provided to protect against such system defects.