Cisco DNCS System Release 2.7 3.7 4.2 Installation Guide
Chapter 4 Phase Three - Install New Software
74
78-4003052-01 Rev G
18 Click File and select New. The Set Up DHCT Download window opens.
19 Complete the following steps to configure the Set Up DHCT Download window
for the test download.
a Click the DHCT Type field arrow and select a device that needs to receive
a Click the DHCT Type field arrow and select a device that needs to receive
the new software.
b Click the Group field arrow and select Default.
c Click the File Description field arrow and select the file that corresponds to
c Click the File Description field arrow and select the file that corresponds to
the new application platform release that you want to download.
Note: Unless you have old or test versions still posted, there should be only
one choice.
d Click the Download Scheduling field arrow and select one of the following,
based on the device type:
–
DHCTs: Select either Normal or Immediate. A Normal download does
not begin until the DHCT is turned off.
–
CableCARD modules: Select Immediate.
20 Click Save. The Association Verification window opens.
21 Verify that the DHCT Type, Group, and Image File versions shown on the
Association Verification window are correct.
22 Configure the following fields on the Association Verification window:
Are you SURE you want to do this?: Type yes.
Enter your name: Type the name (in lowercase letters) you provided to Cisco
Services when you requested the secure GUI password.
Password: Type the password you received from Cisco Services.