Cisco DNCS System Release 2.2 3.2 Installation Guide
Chapter 3 Phase Two - Test New Software
56
78-4003052-01 Rev G
Load the New Image File
The next step is to load the image files onto the BFS. Load only the image files for the
devices that you have in your system.
Important!
Important!
If a file is used by more than one DHCT type or DHCT revision, you only need to
add that file once.
Unnecessary files will slow the software download. Be careful to load only those
files currently required by your system. Refer to How Do I Manage the Files on
My System? (on page 2) for more information.
Loading the Image File onto the BFS
1 On the DNCS Administrative Console, select the DNCS tab and then select the
following tab based on the system release you have installed:
For SR 2.2/3.2/4.0 and earlier, select the Element Provisioning tab.
For SR 2.5/3.5/4.2 and later, select the Home Element Provisioning tab.
2 Click Image. The Image List window opens.
3 Click the Downloadable Files tab.
4 On the Image List window, click File and select New. The Set Up Downloadable
3 Click the Downloadable Files tab.
4 On the Image List window, click File and select New. The Set Up Downloadable
File window opens.
5 Click Browse. The Select Image File window opens.