Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Installation Guide
4-2
DBDS System Time Maintenance
78-4011510-01 Rev C
DBDS System Time Synchronization Maintenance
Introduction
This section provides the procedure to confirm that the DNCS NTP process is
working correctly.
Verifying DNCS xntpd Operation
Follow these steps to verify operation of the DNCS xntpd.
1.
From the DNCS xterm window type ps –ef | grep ntp and then press Enter.
2.
Look at the right-hand area of the xterm: DNCS window. Does the display on
your window include /usr/local/xntpd or /usr/local/bin/xntpd?
•
If yes, the DNCS is running xntpd. Go to Verifying DNCS Connectivity,
later in this section.
•
If no, go to Starting the xntpd process, next in this section.