Cisco DNCS System Release 2.8 3.8 4.3 Installation Guide
Run fixSiteConfigs on the RNCS EC
OL-31613-01
45
Run fixSiteConfigs on the RNCS EC
Only perform this procedure if the site you are upgrading includes an RNCS EC
system. If the site you are upgrading does not have an RNCS EC, skip this procedure
and go to the next procedure in this chapter.
system. If the site you are upgrading does not have an RNCS EC, skip this procedure
and go to the next procedure in this chapter.
This procedure fixes the /tftpboot config files for headend components. It also sets
the AlarmServerIpAddr entries to the correct IP address for the RNCS EC.
1 As root user on the RNCS EC, type the following command and press Enter:
the AlarmServerIpAddr entries to the correct IP address for the RNCS EC.
1 As root user on the RNCS EC, type the following command and press Enter:
fixSiteConfigs
Sample output:
# fixSiteConfigs
fixSiteConfigs: Fixing config files in
lionn1:/tftpboot...
lionn1:/tftpboot...
fixSiteConfigs: modified: goqam.config
fixSiteConfigs: modified: gqam.config
fixSiteConfigs: Ignoring platform file 'inet-config'
fixSiteConfigs: modified: mqam.config
fixSiteConfigs: WARNING: unknown tftpboot config file:
'nc.config'
'nc.config'
fixSiteConfigs: no mods needed: nc.config
fixSiteConfigs: modified: qam.config
fixSiteConfigs: modified: qpsk.config
fixSiteConfigs: modified: scsmqam.config
fixSiteConfigs: 6 of 9 tftpboot config files were
modified
modified
2 Type the following command and press Enter:
cd /tftpboot
3 Verify that each of the .config files contains the correct IP addresses.
Notes:
The QAM config files contain two IpAddr variables, RpcServerIpAddr and
AlarmServerIpAddr. These entries should have the following IP addresses
assigned:
AlarmServerIpAddr. These entries should have the following IP addresses
assigned:
RpcServerIpAddr = [dncsatm IP Address]
AlarmServerIpAddr = [RNCS IP Address]
If these variables do NOT have the correct IP address assigned, contact Cisco
Services for assistance.
Services for assistance.
Ignore any inet-config and nc.config warnings.