Cisco DNCS System Release 2.2 3.2 Installation Guide
Chapter 4 Maintenance Window Activities
28
OL-31613-01
Log into the New Explorer Controller
Perform this procedure in remote terminal windows on the new VM by logging into
the EC with your user account:
1 Open a remote terminal window to the new VM and log in with your user
the EC with your user account:
1 Open a remote terminal window to the new VM and log in with your user
account. Then, type
sux -
and press Enter to log into the EC as the root user.
The system prompts for the root password.
2 Type the root password and press Enter.
3 Type the following command and press Enter to change to the dncs user:
3 Type the following command and press Enter to change to the dncs user:
sux – dncs
4 Type the following commands and press Enter (after each command) to kill the
dncsInitd process:
a
a
dncsKill
b
appKill
5
Type exit and press Enter to log out as the dncs user.
6 Does this system include an RNCS EC?
If yes, go to Log into the New RNCS Explorer Controller (on page 29).
If no, go to Post-Upgrade Check for the 3010 Listening Interface (on page 30).