Cisco DNCS System Release 2.7 3.7 4.2 Installation Guide

Page of 124
 
Chapter 5    SR 7.0 Post Upgrade Procedures 
 
 
 
56 
OL-31613-01 
        Session 10:   00:00:00:00:00:02/20
 
        Session 11:   00:00:00:00:00:02/22
 
        Session 12:   00:00:00:00:00:02/199
 
24  Does the Session Count total equal the number of sessions you recorded in the 
Check the Number of BFS Sessions procedure? 
 
If yes, continue with step 31. 
 
If no, contact Cisco Services for assistance. 
25  Telnet to the GQAM modulator where BFS sessions are built. 
Example: 
telnet 192.0.2.30
 
Note: Enter the login ID and password for the GQAM. If you make a typing 
error, follow these steps to recover. 
a  Press the Ctrl and ] keys simultaneously to return to the telnet prompt. 
b  Type mode ch and press Enter twice. 
26  Type the following command and press Enter. The system opens the sessions 
that are set up on the GQAM port. 
print_session_status <port number>
  
Note: Port numbers on the GQAM are 0-15. If your sessions are built on port 16 
in the QAM WUI, it will be port 15 on the GQAM. 
27  Locate Session ID 00:00:00:00:00:00:2. Is this session in the 
CREATE_TABMAN_WAITING state? 
 
If yes, go to step 28. 
 
If no, troubleshoot this matter using your established escalation procedures. 
Note:  Call Cisco Services if you are unable to resolve the issue. 
28  Does the Program State field of Session ID 00:00:00:00:00:00:2 show 
PAT_ASSEMBLY
 
If yes, go to the next procedure in this chapter. 
 
If no, troubleshoot this matter using your established escalation procedures. 
Note: Call Cisco Services if you are unable to resolve the issue. 
 
downloadlike
ArtboardArtboardArtboard