Cisco Cisco RF Gateway 1
Enabling HTTPS on the RF Gateway 1
78-4025112-01 Rev H0
213
rnity/CN=10.90.149.80/emailAddress=amelia@purdue.edu
Getting CA Private Key
Enter pass phrase for ca.key:
OpenSSL>
Downloading Key and Certificate Files to the RF Gateway 1
The SSL Configuration menu is used to set the FTP server IP address, user name,
and password. It is also used to set the path to the key and certificate file and the key
and certificate filename. The Server Key(server.pem) must not be password
protected.
and password. It is also used to set the path to the key and certificate file and the key
and certificate filename. The Server Key(server.pem) must not be password
protected.
Follow the instructions below to configure the SSL settings.
1 Navigate to the System/SSL Configuration page.
1 Navigate to the System/SSL Configuration page.
Result: The following screen is displayed.
2 In the Server Key Information box, enter the Server Key Path and Server Key
Name.
Note: It is recommended that the Server Key be named "server.pem".
Note: It is recommended that the Server Key be named "server.pem".
3 Click Download Server Key.