Cisco Cisco StadiumVision Mobile Installation Guide
© 2011 Cisco Systems, Inc. All rights reserved.
Page 21 of 37
h. Change your password as directed.
i. Once you have changed the password, make sure to logout and then login
again in order to acquire the correct permissions. Failing to do so will cause
certain tasks to fail, for example performing an upgrade.
certain tasks to fail, for example performing an upgrade.
Once your token has been verified, the SV Director server will create a
temporary user account using your Cisco ID and the password you specify when
prompted. You may now use your shell account to perform system tasks until
12:00 a.m. If you need continued shell access and log out of the system after
this time, you will need to perform the authentication procedure again to gain
access to the SV Director server.
temporary user account using your Cisco ID and the password you specify when
prompted. You may now use your shell account to perform system tasks until
12:00 a.m. If you need continued shell access and log out of the system after
this time, you will need to perform the authentication procedure again to gain
access to the SV Director server.
Disabling the SNE TAC Account
After an upgrade and after you verify that SV Director is running properly, disable
TAC access as follows.
TAC access as follows.
1. Login as
„installer‟.
j. Disable the TAC account (small
„L‟ from the main menu; then, option 2).
Workflow for Upgrading SV Director
Here is are the high-level steps for upgrading SV Director. Refer to the SV Director
Backup and Restore Guide for instructions on how to backup and restore the
primary and secondary servers.
Backup and Restore Guide for instructions on how to backup and restore the
primary and secondary servers.