Cisco Cisco StadiumVision Mobile Installation Guide
© 2011 Cisco Systems, Inc. All rights reserved
Page 14 of 71
Figure 7.
SV Director Server Front Panel LEDs and Switches
LED
Color
State
Description
1
Green
On
Power on.
Off
Off
Power off.
2
Green
On
Standby or ready for operation.
Green
Blinking
Degraded operation (for example, power supply non-redundancy,
part of system memory mapped out of BIOS).
part of system memory mapped out of BIOS).
Amber
On
One or more critical fault conditions.
Amber
Blinking
One or more noncritical fault conditions.
3
Green
On
Hard disk drive activity. This is an aggregated indication for all hard
disk drives. Each hard disk drive contains its own activity and fault
LEDs.
disk drives. Each hard disk drive contains its own activity and fault
LEDs.
Amber
On
Hard disk drive fault. This is an aggregated indication for all hard
disk drives. Each hard disk drive contains its own activity and fault
LEDs.
disk drives. Each hard disk drive contains its own activity and fault
LEDs.
4
Green
On
NIC activity.
5
Blue
System identity. LED can be toggled remotely or by the front-panel
ID switch to obtain the system’s identity.
ID switch to obtain the system’s identity.
6
Switch
Toggles appliance ID LED
7
Switch
Asserts the NMI (non-maskable interrupt) to the processor on the
appliance. When pressed, clears the processor allowing the
processor to continue to execute the software normally.
appliance. When pressed, clears the processor allowing the
processor to continue to execute the software normally.
8
Switch
Resets the appliance.
9
Switch
Toggles the appliance power