Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 27
 
 
© 2011
−2015 Cisco Systems, Inc. All rights reserved. 
 4 of 27  
 
Sending a Command 
The Device Configuration, Director Configuration, and Tools drawers contain 
categories of commands you can send to DMPs. 
To send a command: 
1.  In the Device List, select the DMP(s) to which you want to send the command. 
You can do a search on DMPs using the Search feature. 
2.  Select a command from one of the Dashboard drawers. Use the Device List 
controls to select/deselect devices. You can mouse over any control to display a 
tool tip about the control. 
Figure 15.  Selecting a Device and a Command 
 
3.  Make changes to command parameters. Not all commands have user-specified 
values. 
4.  Click the Play button.The following confirmation message is displayed: 
“Are you sure you want to execute command ‘command name’ on the selected devices ?” 
5.  Confirm or cancel the action. 
While the command is executing on a device, icons will display in the first column of 
the Device List next to the device(s). You can mouse over the first column heading 
(blank) to view a tool tip that defines each status icon. Refer t
. 
Figure 16.  Command Status Icons 
 
When the operation is complete, the results will be updated in the Device List. Use 
the scroll bar to view the results for all selected devices. You can view detailed 
command from the Device Details tabs.