Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 30
Managing Zones, Groups and Locations 
 
© 2011-2013 Cisco Systems, Inc. All rights reserved. 
 23 of 30  
 
 
delay_zone: All TVs assigned to this zone will display the configured Delay channel when the Delay 
ad hoc state is invoked by the event operator. The Delay channel is defined on the Control Panel. 
Refer to the Defining Channels and Channel Guides document. 
nonevent_zone: All TVs assigned to this zone will display the default TV channel when there is no 
active event state. 
Managing Zones, Groups, and Locations 
Once you have added zones, groups, and locations in Cisco StadiumVision Director, you can use the 
Zones & Groups screen to display, manage, and edit information the selected zone, group, or 
location as described in this section. 
Understanding Group and Zone Associations 
For any action to be applied to a group, the group must be part of a zone. Some zones will only have 
a single group, but you need to define both. You can name them the same and simply append ‘Zone’ 
to the zone name and a ‘Group’ to the group name for clarity. 
When you assign multiple groups to a zone, all the DMPs in those groups become part of that zone. 
Viewing Zone, Group, and Location Associations 
 
Click the ZonesGroups, and Locations buttons on the Zones & Groups tabs to display the zones, 
groups, and location lists in the left column of the Zones & Groups screen. To view information about 
an item in the list, simply select it. The associated information will display in the right column on the 
screen. The numbers in each column indicate the number of zones, groups, and locations are 
associated with the selected item. Numbers that are underlined in blue are hot links that you can 
click to display more details about the selected item. The details display in the opposite side of the 
screen.  
In the example shown below, there are 10 locations for the concourse1_group. When you click the 
number ‘10’ link, the screen displays the DMP Name, IP Address, MAC Address, TV Display Spec, 
and the number of groups for each of the 10 locations for the concourse1_group. The information 
displays in the Locations panel on the right.