Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
Figure 7.
2x3 Video Wall Cabling Example for the Cisco DMP 4310G Using TV Tile Matrix
Functionality.
These dedicated DMPs provide the video signal for the group of TVs that the DMP is
connected to through the daisy-chain. Depending on the screen manufacturer, the RS-
232 connections can also be daisy-chained if this feature is available.
When operating in tile matrix mode, the TVs are fed the same video signal. Based on
the TV’s tile matrix configuration, the TV knows to first scale input video to the size of
the configured x,y dimensions, and then to display its “piece” of the overall display
based on its configured position within the matrix.
NOTE: If you want to show multiple types of content, such as four
different channels on each of the screens, then you need to
connect a Cisco DMP 4310G behind each TV.
different channels on each of the screens, then you need to
connect a Cisco DMP 4310G behind each TV.
Other Video Wall Configurations
While the 2x3 video wall is the most commonly used video wall configuration, using the
information and concepts for the
, you can create any number of different video wall configurations.
IMPORTANT: These video wall examples require a different
number of DMPs and cabling than the 2x3 video wall.
number of DMPs and cabling than the 2x3 video wall.
© Cisco Systems, Inc. All rights reserved.
17 of 48