Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
Limitations
■
Multicast video is not supported due to bandwidth limitations over a wireless network.
■
TV on/off multicast control messages are sent one time only. If the message is lost, then a TV might not power
on or off as expected.
on or off as expected.
■
If a data feed using multicast is dropped, the DMP continues to show old data or no data if the first message is
lost.
lost.
Required Configuration
1.
Log in to Cisco Dynamic Signage Director as an administrator.
2.
From the Management Dashboard, go to:
Dynamic Signage Director Configuration > System Configuration > Global DMP Settings > SV-4K Settings
3.
Specify the Global SSID and Wifi Passphrase properties:
Figure 1 SV-4K WiFi Global SSID and WiFi Passphrase Configuration
1 Global SSID—Type the network SSID to be used by all SV-4Ks in
the system that are using a WiFi connection.
2 Wifi Passphrase—Type the WEP,
WPA1, or WPA2 passphrase.
4.
Save the configuration.
5.
Connect the SV-4K device using a hard-wired Ethernet PoE+ connection.
2
How to Deploy WiFi Network Connectivity on the SV-4K
Limitations