Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
Full Screen Dual Video Default Template (SV-4K Media
Players Only)
Players Only)
Beginning
with Cisco StadiumVision Director Release 4.0, a full screen
dual
video default template is available for the SV-4K media player. Dual
video
regions allow you to overlay two video regions; a secondary local or
multicast
video region and a primary video region.
The dual video template provides the following capabilities:
l
Show two video feeds at the same time.
l
Place video-based advertisements.
l
Promote a moment of exclusivity during an event.
l
Apply luminance (luma) keying to the secondary video region.
NOTE: The dual video template is only supported on the SV-4K
media player.
media player.
lists the specifications of the dual video regions.
Table 7. Full Screen Dual Video Template Specifications
Region
Specification
Video 1
l
Can be controlled using an infrared remote (IR) remote or local
control.
control.
l
In the template, video region 1 appears as the bottom or primary
layer.
layer.
l
Supports audio.
l
Source: Local or multicast video.
Video 2
l
Cannot be controlled through an IR remote or local control.
l
In the template, video region 2 fully overlaps video region 1.
l
Luminance (luma) keying is applied to second video region (it
cannot be disabled or changed in the template).
cannot be disabled or changed in the template).
l
Does not play audio.
l
Source: Local or multicast video.
NOTE:
The luma key default is set to #ff2000. To enable luma
keying, click the checkbox. To change the global luma key value
from the Management Dashboard, go to SV Director
Configuration > System Configuration > Global
DMP Settings > SV-4K Settings.
from the Management Dashboard, go to SV Director
Configuration > System Configuration > Global
DMP Settings > SV-4K Settings.
NOTE:
For additional information on luma keying, refer to the
6 of 42