Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 103
 
 
© 2012 Cisco Systems, Inc. All rights reserved.   
 
Page 59 of 103 
 
30. Click                    at the bottom of the page to save the configuration. 
31. Once this configuration is completed and saved, click on the DHCP Server and 
click the restart icon to restart the DHCP Server. 
 
Configuring Display Specifications for TVs 
The Cisco StadiumVision Director Control Panel requires that you configure certain 
commands for the TVs used in the venue. These commands are used in the 
communications between the DMP and the TV. It is critical that this information is 
accurate as it will impact the StadiumVision TVs in ways that may not be obvious at 
first pass.  
When you define Locations in StadiumVision Director (later in this process), you will 
select the “Display Spec” for the type of TV (brand/model) that is physically installed 
at the defined Location. Therefore, it is recommended that you configure display 
specifications for all TV types in the venue prior to adding the Locations to 
StadiumVision Director.  
You will need to define a different Display Spec for each unique TV type based on 
how images are centered and stretched, and which serial commands are used to 
control the TVs. In some cases, all TVs from a certain manufacturer can use the 
same display specs. In other cases different TV models from the same company 
may have different display specs.