Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 103
 
 
© 2012 Cisco Systems, Inc. All rights reserved.   
 
Page 76 of 103 
Viewing Auto-Provisioning Status on the TV 
Once the auto-provisioning workflow reaches step 4 the DMP is sufficiently 
initialized to be able to display the progress of the remaining auto-provisioning 
workflow. At this point the TV screen displays: 
•  The barcode for the DMP MAC address. 
•  A ticker showing the MIB variables, IP address, CDP variables, and switch 
settings. 
•  Intermediate status of the auto-provisioning. This tells you what step you are on 
in the auto-provisioning, what step is next, and what is happening to the DMP 
(e.g., transitioning to the ready state). 
When auto-provisioning is finished, the default video channel displays on the TV, 
along with a “Completed!” status message. If the Completed message does not 
display, auto-provisioning has not been successful. 
Viewing the DMP Readiness State in the Control Panel 
To view which state (Not Ready, Ready, In Production) the DMP is in during auto-
registration and provisioning: 
1.  Open the Control Panel. 
2.  Select Setup > Devices. 
3.  Select the Locations & DMP tab to display DMP information, including the 
current state. The State column will display ‘Ready’ when the DMP has been 
auto-provisioned but is yet to be mapped to a Location. Refer t
. 
Figure 51. 
Viewing the DMP Readiness State