Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
Ports on the SV-4K Media Player
Figure 2. SV-4K Front Panel
Table 4. SV-4K Front Panel Port Descriptions
Port Name
Usage
Description
Audio
1
Required only for connections that do not support
audio, such as HDMI-to-DVI connections from
SV-4K to the TV.
audio, such as HDMI-to-DVI connections from
SV-4K to the TV.
3.5 mm female audio
connector for analog stereo
signal.
connector for analog stereo
signal.
IR
The SV-4K does not have an internal infrared
receiver. You must use the included IR extender
cable to support an IR remote.
receiver. You must use the included IR extender
cable to support an IR remote.
3.5 mm infrared in/out.
Serial
Connect to TV serial port for control of the TV via
RS-232 commands.
RS-232 commands.
RS-232 serial interface with
male DE-9 connector. This
connection is used for
TV control.
male DE-9 connector. This
connection is used for
TV control.
USB
Not supported.
USB 2.0 port
1
The analog audio out port is designed to drive line-level impedances in the higher Ohm range, such as
for commercial grade speaker systems. Headphones are typically just a few Ohms and not recommended
for use with this port.
for use with this port.
4 of 68
© Cisco Systems, Inc. All rights reserved.